Working Pressure:DN8~DN100 PN63
Full Port
ISO5211 Direct Mounting Pad
Blowout-Proof Stem Design
Anti-Static Device
Locking Device
Operation:Manual Or Actuator
Various Thread Standards Available
Investment Casting
Working Temperature:-20℃~150℃
Suitable Medium:Water,Oil,Gas
Design Standard:ASME B16.34
Face to face:DIN3202-M3
Threaded Ends:ANSI B.20.1(NPT):BS21;DIN2999/259;IS0228/1;JIS B03;IS07/1
Socket welded:ANSIB16,11
Inspection and testing:API598/MSS SP-110/EN 12266
|
No． |
PART NAME |
MATERIAL |
||
|
01 |
BODY |
CF8M |
CF8 |
WCB |
|
02 |
JOINT GASKET |
PTFE |
PTFE |
PTFE |
|
03 |
CAP |
CF8M |
CF8 |
WCB |
|
04 |
SEAT |
PTFE |
PTFE |
PTFE |
|
05 |
BALL |
SS316 |
SS304 |
SS304 |
|
06 |
ANTI-STATIC DEVICE |
SS316 |
SS304 |
SS304 |
|
07 |
STEM |
SS316 |
SS304 |
SS304 |
|
08 |
THRUST WASHER |
PTFE |
PTFE |
PTFE |
|
09 |
O-RING |
FKM |
FKM |
FKM |
|
10 |
STEM PACKING |
PTFE |
PTFE |
PTFE |
|
11 |
GLAND BUSH |
SS304 |
SS304 |
SS304 |
|
12 |
BUTTERFLY SPRING |
SS304 |
SS304 |
SS304 |
|
13 |
ANTI LOOSING CAP |
SS304 |
SS304 |
SS304 |
|
14 |
WASHER |
SS304 |
SS304 |
SS304 |
|
15 |
NUT |
SS304 |
SS304 |
SS304 |
|
16 |
LOCK |
SS201 |
SS201 |
SS201 |
|
17 |
HANDLE |
SS201 |
SS201 |
SS201 |
|
18 |
HANDLE COVER |
PVC |
PVC |
PVC |
|
19 |
BOLT |
SS304 |
SS304 |
SS304 |
|
20 |
NUT |
SS304 |
SS304 |
SS304 |
|
21 |
WASHER |
SS304 |
SS304 |
SS304 |
1.FULL BORE DESIGN
The bore of the valve is consistent with the inner diameter of the pipeline.This design facilitates cleaning and maintenance of piping lines.
2.VARIOUS THREAD STANDARDS AVAILABALE
Our company produces various thread according many countries standard
to better serve our customers in all countries.
3.ISO5211 MOUNTING PAD
Allows the actuator to be mounted on the valve, thus increasing the efficiency and reliability of the system.
4.BLOWOUT-PROOF STEM DESIGN
The stem is independent of the ball, and the stem is designed as an integral T-shaped structure protected by the body bosses, designed to ensure that the stem will not be blown out by the medium under extreme conditions, such as abnormal pressure in the cavity or failure of the packing platen, thus ensuring the sealing and safety of the valve. Enhanced durability and reliability.
5.ANTI-STATIC DEVICE
The valve stem is equipped with springs and conductive beads to maintain constant contact between the stem, ball, and valve body to transfer the electrical charge, thus avoiding static buildup when the valve is switched on and off.
6.V-PACKING DESIGN
The V-packing combination consists of an upper sealing packing, an intermediate sealing packing and a lower sealing packing, which are stacked on top of each other to enhance the sealing effect during use.
