Products

F158-2PC Ball Valve Flanged End With Direct Mounting Pad ASME 150LBS

F158-150LB

F158-2PC Ball Valve Flanged End With Direct Mounting Pad ASME 150LBS
FEATURES

Working Pressure:1/2”~10” 150LB

Full Port

ISO5211 Direct Mounting Pad

Blowout-Proof Stem Design

Anti-Static Device

Locking Device

Operation:Manual Or Actuator

Investment Casting

Working Temperature:-20℃~150℃

Suitable Medium:Water,Oil,Gas

STANDARDS

Design Standard:ASMEB16.34

End Flange:ASME B16.5

Face to Face:ASME B16.10

Inspection and testing:API598

STRUCTURE

No.

PART NAME

MATERIAL

01

BOLT

A193-B8

A193-B8

A193-B8

02

NUT

A194-8

A194-8

A194-8

03

CAP

CF8M

CF8

WCB

04

SEAT

PTFE

PTFE

PTFE

05

BALL

SS316

SS304

SS304

06

ANTI-STATIC DEVICE

SS316

SS304

SS304

07

JOINT GASKET

PTFE

PTFE

PTFE

08

BODY

CF8M

CF8

WCB

09

THRUST WASHER

PTFE

PTFE

PTFE

10

O-RING

Viton

Viton

Viton

11

STEM PACKING

PTFE

PTFE

PTFE

12

STEM

SS316

SS304

SS304

13

COMPRESSION RING

SS304

SS304

SS304

14

GLAND

CF8

CF8

CF8

15

LOCATING PIECE

SS304

SS304

SS304

16

BOLT

SS304

SS304

SS304

17

NUT

SS304

SS304

SS304

18

BUTTERFLY SPRING

SS304

SS304

SS304

19

WASHER

SS304

SS304

SS304

20

BOLT

SS304

SS304

SS304

21

NUT

SS304

SS304

SS304

22

HANDLE

CF8

CF8

CF8

FEATURES
/UploadFiles/product/og2024122711580558594202.jpg

1.FULL BORE DESIGN

The bore of the valve is consistent with the inner diameter of the pipeline.This design facilitates cleaning and maintenance of piping lines.

/UploadFiles/product/og2024122712072572559893.jpg

2.VARIOUS FLANGE STANDARDS AVAILABALE

Our company produces various flange according many countries standard to better serve our  customers in all countries.

/UploadFiles/product/og2024122712074074013889.jpg

3.ISO5211 MOUNTING PAD

Allows the actuator to be mounted on the valve, thus increasing the efficiency and reliability of the system.

/UploadFiles/product/og2024122712075275277924.jpg

4.BLOWOUT-PROOF STEM DESIGN

The stem is independent of the ball, and the stem is designed as an integral T-shaped structure protected by the body bosses, designed to ensure that the stem will not be blown out by the medium under extreme conditions, such as abnormal pressure in the cavity or failure of the packing platen, thus ensuring the sealing and safety of the valve. Enhanced durability and reliability.

/UploadFiles/product/og2024122712091491451217.jpg

5.ANTI-STATIC DEVICE

The valve stem is equipped with springs and conductive beads to maintain constant contact between the stem, ball, and valve body to transfer the electrical charge, thus avoiding static buildup when the valve is switched on and off.

/UploadFiles/product/og2024122712092492463985.jpg

6.V-PACKING DESIGN

The V-packing combination consists of an upper sealing packing, an intermediate sealing packing and a lower sealing packing, which are stacked on top of each other to enhance the sealing effect during use.

Inquiry
Copyright By © Zhejiang Wonston Valve Co.,Ltd.
86 13587675143