F200-3PC Ball Valve Flanged End With Direct Mounting Pad DIN PN40

1.FULL BORE DESIGN

The bore of the valve is consistent with the inner diameter of the pipeline.This design facilitates cleaning and maintenance of piping lines.

2.VARIOUS FLANGE STANDARDS AVAILABALE

Our company produces various flange according many countries standard to better serve our  customers in all countries.

3.ISO5211 MOUNTING PAD

Allows the actuator to be mounted on the valve, thus increasing the efficiency and reliability of the system.

4.BLOWOUT-PROOF STEM DESIGN

The stem is independent of the ball, and the stem is designed as an integral T-shaped structure protected by the body bosses, designed to ensure that the stem will not be blown out by the medium under extreme conditions, such as abnormal pressure in the cavity or failure of the packing platen, thus ensuring the sealing and safety of the valve. Enhanced durability and reliability.

5.ANTI-STATIC DEVICE

The valve stem is equipped with springs and conductive beads to maintain constant contact between the stem, ball, and valve body to transfer the electrical charge, thus avoiding static buildup when the valve is switched on and off.

6.V-PACKING DESIGN

The V-packing combination consists of an upper sealing packing, an intermediate sealing packing and a lower sealing packing, which are stacked on top of each other to enhance the sealing effect during use.